Pn16 Ductile Iron DN600 Sluice Valve Resilient Rubber Seat Manual Gate Valve

• Customization: Available
• Media: Gas, Oil, Water, Vapour
• Temperature: Ordinary Temperature
• Model NO.: ANSI GATE VALVE05
• Type: Direct-acting
• Material: Cast Iron
• Connection Form: Flange
• Pressure: Ordinary Temperature
• Actuator: Manual
• Seal Surface: Wedge Gate Valve
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Regulation, Flow Control
• Standard: ANSI
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Name: Sluice Valve Resilient Rubber Seat Gate Valve
• Connection Mode: Flange
• Power: Manual
• Made in: China
• Brand: Yao Valves
• Transport Package: Carton or Pallet
• Specification: DN50-DN600
• Trademark: Yao Valves
• Origin: China
• HS Code: 8481804090
• Production Capacity: 50000PCS

Product Description

Pn16 Ductile Iron DN600 Sluice Valve Resilient Rubber Seat Manual Gate Valve

 

Product Description

The opening and closing part of the American standard gate valve is the gate plate. The movement direction of the American standard gate valve is perpendicular to the fluid direction. The gate valve can only be fully open and fully closed, and cannot be used for regulation and throttling. The gate has two sealing surfaces. The two sealing surfaces of the commonly used mode gate valve form a wedge, and the wedge Angle varies with the valve parameters, usually 50 °, and 2°52' when the medium temperature is not high. The gate plate of the wedge gate valve can be made into an integral body, which is called a rigid gate plate. It can also be made into a gate plate that can undergo slight deformation to improve its processability and compensate for the deviation of the sealing surface Angle during the processing. This type of gate plate is called an elastic gate plate.

Detailed Photos

 

 

Technical Specifications:

Technical Standard 
1.Manufacturing Standards:ANSI /AWWA C515-2009
2.The Length Of The Standard Structure:ASME B16.10
3.The Flange Standard:ASME B16.1 125 pounds or ANSI/AWWA C100/ A21.10
4.Test Pressure Standard: ANSI /AWWA C515-2009

ITEM NO.	PART NAME	MATERIAL
1	Body	GGG50/GGG40
2	Bonnet	GGG50/GGG40
3	Gland	GGG50/GGG40
4	Disc	GGG50/GGG40+EPDM
5	Stem Nut	Brass for DN50-DN350  GGG50/GGG40 for DN400-DN600
6	Stem	2Cr13
7	Holding Ring	Brass
8	''O''-Ring	Silica Gel
9	Handwheel	GGG50/GGG40
10	Seals	EPDM
11	Bolt	Carbon Steel
12	Bolt	Stainless Steel

Dimension

AWWA C515 125LB
DN	L	H	a	d	c	x-n	T
50	178	240	50	152	120.5	4-Φ19	16
65	190	270	65	178	139.5	4-Φ19	17.5
80	203	290	80	191	152.5	4-Φ19	19
100	229	330	100	229	190.5	8-Φ19	24
125	254	380	125	254	216	8-Φ22	24
150	267	420	150	279	241.5	8-Φ22	25.5
200	292	510	200	343	298.5	8-Φ22	29
250	330	600	250	406	362	12-Φ25	30.5
300	356	690	300	483	432	12-Φ25	32
350	381	780	350	533	476	12-Φ29	35
400	406	880	400	597	539.5	16-Φ29	37
450	432	1000	450	635	577.9	16-Φ32	39.7
500	457	1055	500	699	635	20-Φ32	43
600	508	1260	600	813	749.5	20-Φ35	48

Packaging & Shipping

 

We can package the goods in cartons, poly bags, or on pallets and subsequently transport them to the port via trucks or containers.